Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kinsho, Michikazu; Kamiya, Junichiro; Abe, Kazuhiko*; Nakamura, Tomaru*
Proceedings of 10th International Particle Accelerator Conference (IPAC '19) (Internet), p.4161 - 4163, 2019/06
Alumina ceramics vacuum chamber which is used for the 3GeV rapid-cycling synchrotron (RCS) in J-PARC is composed of alumina duct, titanium (Ti) flanges and Ti sleeves. Before brazing the alumina duct and the Ti sleeves, the Ti sleeves were treated with nitric hydrofluoric acid. The purpose of this study is to clear the effect of this treatment for titanium material. It was cleared by SEM observation that the roughness of the titanium material after the nitric hydrofluoric acid treatment becomes big. It was also measured that the thickness of oxide film on surface of the titanium material was 12.7 nm before treatment and 6.0 nm after treatment. It became clear that both the clearing of oxide layer on the alumina ceramics and the vacuum condition of the vacuum heating furnace were important for brazing between alumina ceramics and pure titanium.
Hotchi, Hideaki; Harada, Hiroyuki; Kato, Shinichi; Okabe, Kota; Saha, P. K.; Shobuda, Yoshihiro; Tamura, Fumihiko; Tani, Norio; Watanabe, Yasuhiro; Yoshimoto, Masahiro
Proceedings of 8th International Particle Accelerator Conference (IPAC '17) (Internet), p.2470 - 2473, 2017/06
For this past year, RCS beam tuning was focused on realizing a high-intensity low-emittance beam required from the downstream facility. The extraction beam emittance including its tail part was successfully decreased by optimizing transverse injection painting, and tune and chromaticity manipulations, where bipolar sextupole field patterns were newly introduced to simultaneously achieve emittance growth mitigation at the early stage of acceleration and beam instability suppression after the middle stage of acceleration. This paper presents the recent experimental results, together with detailed discussions for the emittance growth and its mitigation mechanisms.
Hasegawa, Kazuo; Kinsho, Michikazu; Oguri, Hidetomo; Yamamoto, Kazami; Naito, Fujio*
Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1409 - 1412, 2016/11
After the summer maintenance in 2015, user operation for the hadron experimental facility (HD) and the life science experimental facility (MLF) was resumed in the middle of October after the tuning of accelerator at J-PARC. In December, we reduced the repetition cycle from 6.0 seconds to the 5.52 seconds at the main ring (MR) and therefore, we have improved beam power to 42 kW, while it was 24 kW in April. The peak beam current at the linac by December 2015 was 30 mA, but we have increased to 40 mA in January, and the tuning was followed by the 3 GeV synchrotron (RCS) and the MR for user operation condition. As a result we improved a beam power to the neutrino experimental facility (NU) to 390 kW by the tuning while it was ranged 300 to 330 kW at 30 mA. User program was performed at 500 kW at the MLF, but it was suspended by a defect of a target in November. It was replaced for a spare one and resumed at 200 kW in February. We have several faults to stop beam operations: ventilation system at the linac by a short circuit, a vacuum leak at the RCS collimator, a breakdown of bending magnet of the MR, etc.
Tani, Norio; Watanabe, Yasuhiro; Hotchi, Hideaki; Harada, Hiroyuki; Yamamoto, Masanobu; Kinsho, Michikazu; Igarashi, Susumu*; Sato, Yoichi*; Shirakata, Masashi*; Koseki, Tadashi*
Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.708 - 711, 2016/11
At the J-PARC Main Ring (MR), there have been various investigation carried out at the moment aiming at the beam operation of MW order. As one of the investigations, a study of the Rapid-Cycling Synchrotron (RCS) magnets was implemented. Increase of the extraction energy of RCS was needed to reduce beam loss, as beam loss in the MR injection region was large under influence of Space Charge effect at the injection beam of 3GeV. Therefore conceptual design of the extraction energy upgrade using dipole and quadrupole magnets of RCS was performed. In this paper, we will report the contents of the study in extraction energy upgrade of RCS magnets and problems which became clear as a result.
